PERCIDE is an advanced peroxide-based disinfectant for
the eradication of mould and decontamination of infectious environments. Its
unique formula penetrates deep into porous surfaces and reacts violently with
mould spores & growth to entirely eradicate them. It also removes the mould
stain and brightens the surface being treated. PERCIDE does not encapsulate or
hide mould, but eradicates its spore roots to ensure consistent, 100% clearance
reports on every mould remediation job. PERCIDE also displays incredible
biocidal activity against bacteria and viruses.
Coronavirus SARS-CoV-2 (COVID-19 virus). TGA Listed 332284
unique peroxide formula, has several innovative design features to provide
consistent, reliable results in mould remediation every time. Its aggressive
reaction with mould can be seen by the rapid fizzing when it contacts mould as
it eradicates the mould spores and lifts the mould out of surface pores.
PERCIDE takes only 10 minutes to achieve a >4.5log reduction (kill) when
tested against Aspergillus Brasiliensis. With a very favourable and economical
RTU profile, PERCIDE is a product of choice.
in accordance with BS EN 1650:2008
|Micro-organism ||Dilution ||Time ||Condition ||Results |
Brasiliensis ||Neat ||10 min ||0.3% albumin ||>99.99% |
Category 3 WATER and BIO-HAZARD DECONTAMINATION
primary function is to provide rapid, powerful pathogen eradication even in the
presence of organic soil. Promoting this function is PERCIDE’s deep pore
penetration ability, making it the ideal decontamination and restoration tool
for trauma, category 3 water and bio contamination applications. PERCIDE leaves
no oily or toxic residue and can be left as residual after clean-up is
complete. PERCIDE is active against gram positive and negative bacteria,
moulds, spores, enveloped and non-enveloped (lipid & non-lipid) viruses
with super-rapid kill rates.
Hard Surface Carrier Test
|Micro-organism ||Dilution ||Time ||Condition ||Resultant Kill |
(gram-positive) ||Neat ||60 sec ||5% Serum ||Pass |
(gram-negative) ||Neat ||60 sec ||5% Serum ||Pass |
Aeruginosa (gram-negative) ||Neat ||60 sec ||5% Serum ||Pass |
Disinfects bio-contaminated surfaces. - Kills mould and removes the staining.
Advanced Peroxide Formula –
Percide comprises a unique peroxide formula for incredible disinfection and
mould eradication performance in a low toxic, easy to use form.
To provide ultimate sanitization of target surfaces, this powerful
anti-microbial package has been combined with super-wetting technology. This
enables the biocide to penetrate faster and deeper into the inner-structure of
fibre and porous substrates.
Cleaning and Destaining –
Percide lifts mould from surface pores and provides incredible cleaning and
destaining action on mould and bacterial discolouration.
Eliminates odours –
Percide eliminates odours at their source by powerful anti-microbial action
against odour causing germs.
Environmentally Safe –
Percide is inherently biodegradable and is a great environmentally responsible
Always pre-test in an inconspicuous
location for substrate sensitivity to chemicals. Observe all safety directions
and read the SDS before use. Percide is safe for use on most carpets and
fabrics, however some delicate fibres and fibres destabilised by disaster
activity could be effected.
No dilution necessary
Mix 9 parts Percide and 1 part Percide Boost for enhanced
cleaning action (Use within 6 hours)
1. Remove and clean away all wet and dry debris.
2. Apply Percide solution to the affected area. Ensure all
surfaces come into contact with Percide solution. Application can be by means
of spray, wet fog, mop or cloth.
3. Agitate briefly, where possible to promote penetration into
porous substrates. Thorough agitation will dramatically aid mould and stain
4. Allow a minimum of 1 minute dwell time for disinfection and
10 minutes dwell time for mould remediation.
5. Rinse thoroughly with clean water.
6. Repeating this process may be required for heavy mould
For heavy mould situations
mix Percide with Percide Boost for accelerated mould eradication and cleaning
performance. Agitate thoroughly, to achieve a perfect result.
After cleaning and
disinfection is completed, Percide can be applied as a post residual treatment
for enhanced inhibition of fresh mould growth.